GE VIVID E9 Service Manual page 152

GE H
EALTHCARE
D GA091568, R
IRECTION
4-2-5 Logging on to VIVID E9 as 'ADM' (cont'd)
As default, two users are defined, USR and ADM.
• USR
If you log on as USR, you will have access to do set-up tasks that a user may need to do during
daily use.
Example: To select a printer.
As default, no password has been set for USR. Just type the name USR and select Login.
• ADM
If you log on as ADM, you will have access to do general set-up and service adjustments.
Example: Adjust network and connectivity settings.
As default, the password for ADM is ulsadm. Select the name ADM, the password (ulsadm) and
select Login.
It is possible for the administrator (ADM) to establish new users and set unique passwords for each
user, including a new password for ADM. If the login as ADM fails, contact the responsible person
in the hospital to get access.
The Emergency button stores data only from current patient examination.
The Cancel button is used to cancel the login.
• If this is the first time the VIVID E9 is turned on, the Imaging and Analysis - Global Level window
is displayed. (If another screen was displayed earlier, before logging out, or turning unit off, that
screen will be displayed.)
Figure 4-17 Imaging and Analysis - Global Level window
4 - 16
5
EVISION
Section 4-2 - General procedures
VIVID E9 S M
ERVICE ANUAL