Options Setup; Software Options; Color Video Printer (Optional) Installation - GE VIVID E9 Service Manual

Hide thumbs Also See for VIVID E9:

Table of Contents

Section 3-11

Options Setup

Most of the options for VIVID E9 are activated by installing a password (alphanumeric text string).

For installation instructions, see:

For available options, see:

An external Color Video Printer may be connected to the USB port on VIVID E9.

SONY UP-D23MD/UP-D25MD and MITSUBISHI CP30DW are medical devices so they can be

placed near the VIVID E9. The USB cable is 5 meters long, so it must be placed within reach

of this cable.

Preparations for installing the CP30DW for the first time

Set Switch 1 and 2 on the rear side of the printer to ON.

Generic installation instructions

1.) Connect the USB cable to the printer and to the USB port on VIVID E9's Rear Panel.

2.) Select the correct Power cable and connect it to the printer and to the mains power outlet.

3.) Switch on the power switch on the printer.

To be able to use the printer, the printer must be selected on the VIVID E9.

For more information, please refer to the "Printer Driver Installation Manual", Direction GA294652, Rev.

3 (or newer).

Section 9-21 "Options - VIVID E9" on page

Please refer to the documentation for the printer if you need help to locate the switches.

Please refer to the "Printer Driver Installation Manual", Direction GA294652, Rev. 3 (or newer)

if you need to install a new printer driver.

Chapter 3 - System setup

3-8-5 "Software Options Configuration" on page