GE VIVID E9 Service Manual page 288

Hide thumbs Also See for VIVID E9:

Table of Contents

USB Hard Drive 2TB with RAID1

The Iomega Ultramax desktop hard drive is an external desktop hard drive, connected via USB to

either a Vivid E9 or an EchoPAC PC workstation. It is configured as RAID 1, so the content is mirrored

on two hard disk drives. Due to the RAID 1 mirroring, the unit can store maximum 1 TB of data.

The intended use for Iomega Ultramax desktop hard drive is for Disk Management.

NOTE:When Disk Management has been performed, it is recommended to backup the Patient Archive to a

medical grade DVD recordable disc (DVD-R).

NOTE:Only connect one USB storage device (like this Iomega Ultramax Desktop Hard Drive) to the Vivid

E9 or EchoPAC PC at a time.

NOTE:To be able to use an USB storage device (like this Iomega Ultramax Desktop Hard Drive) on a Vivid

E9, the Vivid E9 may need a BIOS upgrade. A CD with the new BIOS software is included in

the kit. Verification and installation instructions are included in the Iomega Ultramax Desktop

Hard Drive Installation Manual, Direction Number EY194147.

NOTE:To be able to use an USB storage device (like this Iomega Ultramax Desktop Hard Drive) on a PC

with EchoPAC SW Only, the user must log on with Administrator rights.

IF THE IOMEGA ULTRAMAX DESKTOP HARD DRIVE IS CONNECTED TO A VIVID E9,

ENSURE THAT IT IS PLACED OUTSIDE THE PATIENT VICINITY/PATIENT

Ethernet is connected to the I/O panel on the rear of the VIVID E9. Printers and external servers

may be available via the Ethernet network.

Network printers

For more information, see:

Network)" on page 3-37.

3-8-4-3 "External Peripherals (Optional) for Connection to Ethernet (TCP/IP

Section 5-12 - Peripherals overview

Troubleshooting