GE VIVID E9 Service Manual page 588

GE H
EALTHCARE
D GA091568, R
IRECTION
8-11-2-4 Remove BEP5 Power Supply
Follow these steps to remove the BEP5 Power Supply:
1.) Remove the two screws on the Power Supply.
Figure 8-229 BEP Power Supply Fixing Screws
2.) Gently insert a flat screwdriver between the power supply and the BEP frame to create enough
space to get hold on the power supply.
Figure 8-230 BEP Power Supply removal
3.) Pull the Power Supply toward you while gently rocking the board up and down, freeing the 2 pins
connected at the back of the board.
4.) To install the BEP5 Power Supply, go to:
8-11-2-5 "Install BEP5 Power Supply" on page
8 - 254
5
EVISION
Section 8-11 - Back End Processor (BEP) parts replacement
8-255.
VIVID E9 S M
ERVICE ANUAL