GE VIVID E9 Service Manual page 382

GE H
EALTHCARE
D GA091568, R
IRECTION
8-5-6-3 Front Cover installation
Follow these steps to install the Front Cover:
1.) Thread the Front Cover so it fits in between chassis and pedals.
2.) Align the Front Cover guide pins with holes in the frame.
3.) Fasten Front Cover with two (2 pc) screws and washers.
NOTE: Orientate the washers as illustrated in the detail in the figure below.
Figure 8-53 Fixing screws with washers
4.) Install the Foot Rest Bumper.
5.) Install the Top Cover.
6.) Install the Side Covers.
8 - 48
5
EVISION
Section 8-5 - Replacing Covers and Bumpers
VIVID E9 S M
ERVICE ANUAL