GE H
EALTHCARE
D
GA091568, R
IRECTION
8-7-4-3
Z-Mechanism installation procedure
1.) Position the Z-Mechanism so the holes for the fixing screws align.
2.) Install two (2x) M6x16 Countersunk and two (2x) M6x16 screws.
3.) Install four (4x) M6x16 (lower part of unit).
4.) Install the XY (Frogleg) Mechanism.
5.) Install the Lower Frame Assembly.
6.) Install the Upper Frame Assembly.
7.) Install the Bulkhead Plate.
8.) Install the Bulkhead Board.
9.) Install the Operator Panel, Lower.
10.)Install the Operator Panel, Upper.
11.)Install the LCD Arm assembly.
12.)Install the LCD Monitor assembly.
13.)Install the LCD Rear Cover.
8 - 184
5
EVISION
Section 8-7 - Replacing XYZ Parts
VIVID E9 S
M
ERVICE
ANUAL