Installing The Autosampler - PerkinElmer AVIO 500 Customer Hardware And Service Manual

Installation
160
3. Once you have reached the desired value, hold the inner adjustment plate in
place and lock the latch by pushing the latch in towards the right.
Figure 4-30
Item
1
2
3

Installing The Autosampler

The instrument can be used with the PerkinElmer S10 Autosamplers. The
following procedures describe the electrical connections necessary to install the
PerkinElmer autosamplers.
1
3
Locking Into Position
Latch Closed
Locking Pin
Inner Adjustment Plate in Place
2
Description