Starting Up The Polyscience Chiller - PerkinElmer AVIO 500 Customer Hardware And Service Manual

Figure 4-4.
Item
1 Reservoir Plug Detail

Starting Up the PolyScience Chiller

Check the following before starting up the PolyScience
• All plumbing connections are tight.
• The chiller reservoir is full.
• The chiller power cord is plugged in.
1. Turn the On/Off switch to the On position. The refrigeration system and the
recirculation pump will start.
Connecting the Gases and Cooling Water
1
Filling the chiller.
Description
127
®
WhisperCool TM Chiller: