Installation
116
Installation Summary
The installation of the system is divided into the following steps:
•
Moving the Instrument
•
Connecting the Gases and Cooling Water
•
Connecting the System Components
•
Installing the Quick-Change Torch Module
•
Installing the Torch Module
•
Installing and Setting Up the Autosampler
•
Setting Up the Printer
•
Instrument Start-up
•
Automatically Aligning the Torch Viewing Position
Setting up the Computer and Printer
To install the ICP software, computer, and printer, refer to Syngistix Software
Installation Guide on Syngistix Document Pack CD.