Appendices; Appendix 1 Remote I/O Signal; List Of Remote I/O Signals - Mitsubishi Electric NZ2GN2S1-16D User Manual

APPENDICES

Appendix 1

List of remote I/O signals

I/O signals for a master/local module are listed as follows.
The I/O signals in this section are the examples with the start of remote I/O signals of the I/O module assigned to the device
number of RX0 and RY0.
Remote input (RX) indicates the input signal from the I/O module to the master/local module.
Remote output (RY) indicates the output signal from the master/local module to the I/O module.
Do not use any "Use prohibited" remote I/O signals. Doing so may result in an accident due to an incorrect
output or malfunction.
Input module (16-point module)
■Remote input signal
Device number
RX0
RX1
RX2
RX3
RX4
RX5
RX6
RX7
RX8
RX9
RXA
RXB
RXC
RXD
RXE
RXF
■Remote output signal
Device number
RY0 to RYF
Remote I/O Signal
Name
External input signal X0
External input signal X1
External input signal X2
External input signal X3
External input signal X4
External input signal X5
External input signal X6
External input signal X7
External input signal X8
External input signal X9
External input signal XA
External input signal XB
External input signal XC
External input signal XD
External input signal XE
External input signal XF
Name
Use prohibited
APPX

Appendix 1 Remote I/O Signal

A
217