Terms - Mitsubishi Electric NZ2GN2S1-16D User Manual

TERMS

Unless otherwise specified, this manual uses the following terms.
Term
Authentication Class
Cyclic transmission
Data link
Engineering tool
Link device
Local station
Master station
Multicast filter
Multicast mode
Remote station
Reserved station
Slave station
Transient transmission
Description
A group of devices and switching hubs compatible with CC-Link IE TSN, ranked according to the functions and
performance by the CC-Link Partner Association.
For Authentication Class, refer to the CC-Link IE TSN Installation Manual (BAP-C3007ENG-001) published by the CC-
Link Partner Association.
A function by which data are periodically exchanged among stations on the same network using link devices
Communications performed by cyclic transmission and transient transmission
A tool used for setting up programmable controllers, programming, debugging, and maintenance
A device (RX, RY, RWr, RWw, LB, or LW) in a module on CC-Link IE TSN
A station that performs cyclic transmission and transient transmission with the master station and other local stations.
A station that controls the entire network. This station can perform cyclic transmission and transient transmission with all
stations.
Only one master station can be used in a network.
A filter function that selects whether or not the own station sends cyclic data of multicast to the subsequent stations after
receiving them.
Since the master station sets the multicast filter according to the system configuration, parameter settings for this filter
function are not required.
Cyclic data are sent to multiple stations in this communication mode.
A station that exchanges I/O signals (bit data) and I/O data (word data) with another station by cyclic transmission. This
station can perform transient transmission.
A station reserved for future use. This station is not actually connected, but counted as a connected station.
A station other than a master station: a local station, a remote station
A function of communication with another station, which is used when requested by a dedicated instruction or an
engineering tool
11