Firmware Update Function - Mitsubishi Electric NZ2GN2S1-16D User Manual

8.9

Firmware Update Function

This function updates the firmware of the I/O module via CC-Link IE TSN.
Update the firmware by using the CC-Link IE TSN Firmware Update Tool.
When the CC-Link IE TSN Firmware Update Tool is necessary, please consult your local Mitsubishi representative.
System configuration
Connect a personal computer and the I/O modules that are the firmware update targets with an Ethernet cable.
(1) Firmware update target I/O modules
Firmware update file
When the firmware update file is necessary, please consult your local Mitsubishi representative.
The file name of the firmware update file is as follows.
Model
NZ2GN2S1-32D, NZ2GN2B1-32D, NZ2GNCF1-32D, NZ2GNCE3-32D, NZ2GN2S1-32T,
NZ2GN2B1-32T, NZ2GNCF1-32T, NZ2GN2S1-32TE, NZ2GN2B1-32TE, NZ2GN2S1-32DT,
NZ2GN2B1-32DT, NZ2GNCE3-32DT, NZ2GN2S1-32DTE, NZ2GN2B1-32DTE
NZ2GN2S1-16D, NZ2GN2B1-16D, NZ2GN12A4-16D, NZ2GN12A4-16DE, NZ2GN2S1-16T,
NZ2GN2B1-16T, NZ2GN12A2-16T, NZ2GN2S1-16TE, NZ2GN2B1-16TE, NZ2GN12A2-16TE,
NZ2GN12A42-16DT, NZ2GN12A42-16DTE
If a file of the firmware version that cannot be used for updating the target I/O module is specified, a firmware
version error (error information: 0010H) occurs.
(1)
·
File name Firmware version
CCIET_DIO.SYF "01" or later
"05" or later
8.9 Firmware Update Function
8
8 FUNCTIONS
179