Mitsubishi Electric NZ2GN2S1-16D User Manual page 239

Output Y OFF information
■Device number
Name
Output Y OFF information
■Description
Whether output Y has been turned off or not can be checked with Output Y OFF information Y (RWrE, RWrF).
When the synchronization output timing setting control or the output time setting control (CC-Link IE TSN
Network synchronous communication function) is used, whether output Y has been turned off or not can be
checked with Output Y OFF information Y (RWrE, RWrF).
■Output Y OFF information Y0 to YF (RWrE)
b15 b14 b13 b12
YF YE YD YC
Off: Output Y has never been turned off.
On: Output Y has been turned off.
■Output Y OFF information Y10 to Y1F (RWrF)
b15 b14 b13 b12
Y1F Y1E Y1D Y1C
Off: Output Y has never been turned off.
On: Output Y has been turned off.
Output Y OFF information Y (RWrE, RWrF) can be cleared using Output Y OFF information clear request Y (RWwE,
RWwF).
ON
Remote output signal RY0
ON
Output Y current value Y0
(RWrA. b0)
ON
External output signal Y0
Output Y OFF information Y0
OFF
(RWrE.b0)
Output Y OFF information
OFF
clear request Y0 (RWwE.b0)
Performed by I/O module
Executed by the program
(1) Remains on even after Y0 turns on.
(2) Turns off when the clear request turns on.
While Output Y OFF information clear request is turned on, regardless of the remote output signal status,
output Y OFF information continues to be cleared.
b11 b10 b9 b8
YB YA Y9 Y8
b11 b10 b9 b8
Y1B Y1A Y19 Y18
ON
OFF
ON
OFF OFF
ON
OFF OFF
ON
(1)
Device number
RWrE, RWrF
b7 b6 b5 b4
Y7 Y6 Y5 Y4
b7 b6 b5 b4
Y17 Y16 Y15 Y14
ON
b3 b2 b1 b0
Y3 Y2 Y1 Y0
b3 b2 b1 b0
Y13 Y12 Y11 Y10
(2)
OFF
OFF
APPX
Appendix 2 Remote Register
A
237