Table of Contents
Advertisement
Installation procedure
Removal procedure
6 INSTALLATION AND WIRING
144
6.9 Wiring of I/O Module and External Device
1.
Connect the wired connector to the I/O module.
Connector screw
2.
Tighten two connector screws (M2.6 screw).
1.
Loosen two connector screws and pull out the
connector horizontally from the module.
Connecting a connector
Tightening connector screws
Removing a connector
- Quick Links:
- Input Modules
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
