Mitsubishi Electric NZ2GN2S1-16D User Manual page 238

Output Y ON information
■Device number
Name
Output Y ON information
■Description
Whether output Y has been turned on or not can be checked with Output Y ON information Y (RWrC, RWrD).
When the synchronization output timing setting control or the output time setting control (CC-Link IE TSN
Network synchronous communication function) is used, whether output Y has been turned on or not can be
checked with Output Y ON information Y (RWrC, RWrD).
■Output Y ON information Y0 to YF (RWrC)
b15 b14 b13
YF YE YD
Off: Output Y has never been turned on.
On: Output Y has been turned on.
■Output Y ON information Y10 to Y1F (RWrD)
b15 b14 b13
Y1F Y1E Y1D
Off: Output Y has never been turned on.
On: Output Y has been turned on.
Output Y ON information Y (RWrC, RWrD) can be cleared using Output Y ON information clear request Y (RWwC,
RWwD).
Remote output signal RY0
Output Y current value Y0
(RWrA. b0)
External output signal Y0
Output Y ON information Y0
(RWrC.b0)
Output Y ON information
clear request Y0 (RWwC.b0)
Performed by I/O module
Executed by the program
(1) Remains on even after Y0 turns off.
(2) Turns off when the clear request turns on.
While Output Y ON information clear request is turned on, regardless of the remote output signal status,
output Y ON information continues to be cleared.
APPX
236
Appendix 2 Remote Register
b12 b11 b10 b9
YC YB YA Y9
b12 b11 b10 b9
Y1C Y1B Y1A Y19
ON
OFF
ON
OFF
ON
OFF
ON
OFF
OFF
Device number
RWrC, RWrD
b8 b7 b6
Y8 Y7 Y6
b8 b7 b6
Y18 Y17 Y16
OFF
OFF
OFF
(1)
b5 b4 b3 b2
Y5 Y4 Y3 Y2
b5 b4 b3 b2
Y15 Y14 Y13 Y12
(2)
OFF
ON
OFF
b1 b0
Y1 Y0
b1 b0
Y11 Y10