Mitsubishi Electric NZ2GN2S1-16D User Manual page 170

Output time setting control
With this function, the output is controlled to turn on or off according to a preset time. The output turns on or off according to a
value set in ON/OFF selection flag (RWw4, RWw5).
 Set the following for the I/O module.
• Output time setting Y (RWw10 to RWw8F): Set a time to turn on or off the output here.
• ON/OFF selection flag (RWw4, RWw5): Set a type of output to be performed (turning on the output or turning off the output)
here.
 Output time setting Y0: 20:00, 7/24/2020, ON/OFF selection flag Y0: Turn on the output.
 The output turns on at 20:00, July 24th, 2020.
I/O module
(1) Synchronization cycle
(2) Input
(3) Operation
(4) Output
8 FUNCTIONS
168
8.3 CC-Link IE TSN Network Synchronous Communication Function
Scan program
Synchronization
control interrupt
(2) (3) (4)
program
External output Y0
OFF
(Status of the Y0
terminal)
(1)
(2) (3) (4) (2) (3) (4)
Ó
Ò
(2) (3) (4) (2) (3) (4)
ON
Ô Ô