Mitsubishi Electric NZ2GN2S1-16D User Manual page 236

■External power supply monitor status (RWr2.b9)
The setting status of the external power supply monitoring function is shown.
Value for RWr2.b9
Off
On
Input ON/OFF information
■Device number
Name
Input ON/OFF information
■Description
When the set time synchronization control mode is used, this area stores a value indicating the input change (whether rising
edge or falling edge) that has been detected at the timing of a value stored in Input time information X (RWr10 to RWr8F).
The value in this area is invalid until a value other than 0 (initial value) has been stored in Input time information X (RWr10
to RWr8F) after the I/O module starts.
■Input ON/OFF information X0 to XF (RWr4)
b15 b14 b13
XF XE XD
Off: Falling edge (ONOFF)
On: Rising edge (OFFON)
■Input ON/OFF information X10 to X1F (RWr5)
b15 b14 b13
X1F X1E X1D
Off: Falling edge (ONOFF)
On: Rising edge (OFFON)
APPX
234
Appendix 2 Remote Register
b12 b11 b10 b9
XC XB XA X9
b12 b11 b10 b9
X1C X1B X1A X19
Setting status
Disable
Enable
Device number
RWr4, RWr5
b8 b7 b6 b5
X8 X7 X6 X5
b8 b7 b6 b5
X18 X17 X16 X15
b4 b3 b2 b1
X4 X3 X2 X1
b4 b3 b2 b1
X14 X13 X12 X11
b0
X0
b0
X10