Mitsubishi Electric NZ2GN2S1-16D User Manual page 188

Programming condition
When RX0 of the I/O module turns on, RY10 turns on.
When an error occurs, an output module (RY40NT5P) outputs a digital signal.
Devices to be used
Device
X1000
Y1010
X20
Y30
Y31
D100
M0
N0
SB49
SM400
SW0B0.0
SW100.0
SW110.0
W101
W200.A
9 PROGRAMMING
186
9.2 Program Example
Description
RX0 input signal (push button) of the I/O module
RY10 output signal (lamp) of the I/O module
Error clear switch
Major error/moderate error lamp
Minor error lamp
Error code
Contact for master control
Nesting
Own station data link status (master station)
Always ON
Data link status (remote station)
Major error/moderate error occurrence status (remote station)
Minor error occurrence status (remote station)
Error code
Error clear request flag
NZ2GN2S1-32DT (RX0 to RX1F)
NZ2GN2S1-32DT (RY0 to RY1F)
Input module (X20 to X2F)
Output module (Y30 to Y3F)
Device to be written by link refresh