Mitsubishi Electric NZ2GN2S1-16D User Manual page 114

Applicable profile
A profile is required to use the I/O module in the CC-Link IE TSN configuration setting.
The following table shows the applicable profile versions.
Model
NZ2GN2S1-32D, NZ2GN2B1-32D, NZ2GN2S1-32T, NZ2GN2B1-32T, NZ2GN2S1-32TE,
NZ2GN2B1-32TE, NZ2GN2S1-32DT, NZ2GN2B1-32DT, NZ2GN2S1-32DTE, NZ2GN2B1-32DTE
NZ2GN2S1-16D, NZ2GN2B1-16D, NZ2GN2S1-16T, NZ2GN2B1-16T, NZ2GN2S1-16TE,
NZ2GN2B1-16TE
NZ2GNCF1-32D, NZ2GNCE3-32D, NZ2GNCF1-32T, NZ2GNCE3-32DT
NZ2GN12A4-16D, NZ2GN12A4-16DE, NZ2GN12A2-16T, NZ2GN12A2-16TE, NZ2GN12A42-
16DT, NZ2GN12A42-16DTE
When the latest profile of the I/O module is necessary, please consult your local Mitsubishi representative.
The profile is a setting file that stores information required for the start-up, operation, and maintenance of devices supporting
the CC-Link family.
A module is added to the "Module List" of the "CC-Link IE TSN Configuration" window by profile registration to the engineering
tool of the master station.
For the profile registration, refer to the following.
 GX Works3 Operating Manual
Ethernet cable
For the specifications of the Ethernet cable, refer to the following.
• When using the I/O modules (except for waterproof modules): ( User's manual for the master station used)
• When using the I/O modules (waterproof modules): ( Page 148 List of Recommended Cables/Connectors for the I/O
Module (Waterproof Module))
Switching hub
For compatible switching hubs, refer to the following.
User's manual for the master station used
5 SYSTEM CONFIGURATION
112
5.1 Applicable Systems
Firmware version
"01" or later
"02" or later
"03" or later
"05" or later
"05" or later
"01" or later
"05" or later
"05" or later
Version
"00" or later
"01" or later
"02" or later
"03" or later
"00" or later
"00" or later
"01" or later
"00" or later