7.16 Replacing the frame (up to appliance no. 19999)
Tools required:
•
Spanner set WM 14249,
•
Allen key 6 mm,
•
Side nippers.
Note:
It is easier to change the frame if you have another person to help you.
1. Open the appliance (see "7.3 Opening the
appliance" on page 29).
2. Remove the compressor (see "7.5 Replacing
the compressor (up to appliance no. 13350)"
on page 30, steps
3.
3. Separate the two cable ties
exhaust damper in position.
4. Remove the foam section
5. Pull the two appliance connectors
out of the frame.
to
).
7.
, which fix the
65
.
44
upwards
59
44
Repair information and repair instructions
65
59
57