6. Using a hammer and punch, drive both brake lever
control bearings from the brake pivot (Fig. 066).
Fig 066
7. Inspect the brake shaft and bushings for excessive
wear. Replace any worn or broken components
(Fig. 067).
A
Fig 067
A. Brake Lever
B. Bushings
Z Master Z597 Diesel Service Manual
DSC-1622
B
C
DSC-1623
C. Cotter Pin
Brake Lever Installation
Reverse the order of removal
Brake Band Removal
1. Raise the left rear tire off the ground (Fig. 068).
Fig 068
2. Remove the four wheel lug bolts.
CHASSIS
DSC-1624
3-17
3