Brake Lever Installation - Toro Z580 DFI Z Master Service Manual

Brake Lever Installation

1. Raise the floor pan assembly.
2. Install the two bushings into the brake lever pivot
mounting hole (Fig. 116).
Fig 116
3. Slide the brake lever assembly pivot through the
bushings (Fig. 117).
Fig 117
Z580/Z589 DFI Z Master Service Manual
4. Install a cotter pin into the pivot shaft (Fig. 118).
5. Lower the floor pan assembly.
PICT-2891a
6. Move the parking brake lever into the released
(forward) position.
7. Position the brake linkage yoke to the brake lever.
Install a clevis and cotter pin to secure (Fig. 119).
PICT-2892a
CHASSIS
Fig 118 IMG-7922a
Fig 119 PICT-2895a
3
3-33