Running A Scene Bank With Auto Trigger - GLP SCAN OPERATOR FX II User Manual

4.17.2 Running a Scene Bank with Auto Trigger

This function makes it possible to let a bank of scenes or a Chaser run automatically in
a loop.
1. Press the AUTO key to call up this function. The auto trigger timing that has
been used last is restored automatically and indicated in the display. The Auto
LED lights up.
2. Use the BANK UP/DOWN keys to select the desired bank.
3. Now you have different possibilities of playback control:
Speed Fader:
This gives playback speed "NEXT time". The respective time is indicated in the
display (max. 1 step all 12min 30sec).
TAPSYNC Button:
Pressing this button at least twice during Auto Trigger mode sets a new speed
for the Auto Trigger according to the given tap speed (the Tapsync button is able
to learn speeds down to 32 sec).
4. Adjust the crossfade time
Fade Time:
Tells us how fast the crossfade to the next step is. The slowest crossfade time is
thereby 32s. The time refers to an over-dazzle time of value 0 to 255. Smaller
movements are done faster.
5. In order to deactivate the auto trigger, press the AUTO button again.
Hint:
You can use the TAPSYNC/MANUAL GO Button at any time, if the device is not
running in Auto Trigger Mode, to manually advance to the next Scene. This is
useful for example in Music Trigger, if you wish to go on to the next Scene
manually during a silent part of the music.
44/57