Viewing A Measurement Data File - Larson Davis SoundAdvisor 831C Reference Manual

1.
2.
3.
FIGURE 8-3 Using the Data File Manager Menu
1.

8.2.1 Viewing a Measurement Data File

SoundAdvisor Model 831C
4.
5.
Step 2
Use the File Manager as shown in Figure 8-3, and press Close (
finished.
Step 1
Navigate to Tools
Step 2
Highlight a data file, press Menu (
only display of the Overall and Session Log tabs for the measurement. The
Using the Data File Manager
1.
When a USB drive is inserted, the USB icon displays.
2.
Shows the available internal storage by default. If you
insert a USB drive and set your File Storage Meter Prefer-
ence to Store (Setup Manager

Preferences), this information refers to the available
USB storage.
3.
The name includes the Default Data File prefix you
defined on the General tab in the measurement setup.
4.
The current measurement can be running, paused, or
stopped while viewing data files.
5.
This data file is stored in 2 locations. The top file is
saved on the USB drive. The bottom file is saved on the
meter's internal memory.
2.
3.
3
Data File Manager.

//*
), then choose View. This opens a read-

System Properties
/*/
1.
Highlight a data file, press
//*
Menu (
), and choose an
option from the pop-up menu.
2.
Regarding data files stored
in the 831C internal memory:
you can Rename, Delete, and
Delete All Internal Files.
3.
You can also use the follow-
ing menu items to navigate the
data file list: Refresh List,
Jump to Beginning, Jump to
End.
)when
8-11