Larson Davis SoundAdvisor 831C Reference Manual page 17

SoundAdvisor Model 831C
Installing Batteries
The battery compartment of the 831C is on the back of the instrument. When
installing batteries, always insert 4 fresh AA batteries, and observe polarity
markings as shown here.
Charging Batteries in the 831C
Before you begin:
Install batteries as shown in "Installing Batteries" on page 2-5.
•
You can charge batteries (NiMH only) in the meter in about 7 hours when the
meter is turned OFF.
Step 1
On the 831C, press Tools
Step 2
Select NiMH as the Battery Type.
Step 3
The Charge drop-down menu is automatically set to On. If you do not want your
power source to charge the batteries, select Off.
Powering the 831C SLM
3
 System Properties.
2-5