Larson Davis SoundAdvisor 831C Reference Manual page 125

16.2 Making a Time History Measurement With Sound Markers
FIGURE 16-1 Setup Manager Markers Tab
SoundAdvisor Model 831C
Step 5
Select any additional settings on the Setup Manager tabs. For more information
on this process, see 6.2.2 Customizing Setup Values On the Setup Manager
Tabs.
/*/
Step 6
Press Close (
Step 7
Set it as the Active setup file.
Step 8
Make a measurement as shown in 16.2 Making a Time History Measurement
With Sound Markers.
The 831C Time History option also allows you to place sound type markers in
the time history data as the sounds occur or during your post measurement
analysis.
To make a measurement with sound markers, follow these steps:
Before you begin:
• Complete steps 1–4 of 16.1 Setting up a Measurement With Time
History.
Step 1
With your Time History setup file highlighted in the Setup Manager, press the top
//*
softkey (
Step 2
If desired, edit the marker names.
Step 3
Select the checkbox in-line with the sound types which should generate sound
recordings this measurement.
If you're also planning to make sound recordings, section
TAKE NOTE
Markers for Sound Recording
Making a Time History Measurement With Sound Markers
) and save your Setup.
) until the Markers tab appears.
is a good reference.
18.1 Setting Up
16-4