Powering On Or Off; Using The Power Control Page - Larson Davis SoundAdvisor 831C Reference Manual

2.2.4 Powering On or Off

2.2.5 Using the Power Control Page

SoundAdvisor Model 831C
Understanding a Low Power At Boot-Up Event
At start up, the 831C performs a power check. If the supplied power is too low,
the low power icon displays over top of the first display. For more
information see Table A.3, "Low Power At Boot-Up".
Powering On
Press and hold the ON/OFF button
and the green LED under the button turns on.
Powering Off
There are 3 ways to power off the 831C:
1. Press the ON/OFF button
press the top-left softkey to select Off.
2. From any screen, press and hold the ON/OFF button
begin the shut down sequence.
3. Press and hold the ON/OFF button
immediate shutdown.
From the Live View, press the UP button
power settings (Live 8/8).
Powering the 831C SLM
0
on the meter until the screen flashes
0
once to access the Power Control page, then
0
Using this method may result in lost data.
CAUTION:
8
Battery settings display
here. You can edit these
settings from the Power
Control page. For more
information, see
Editing Power Settings
0
for 3 seconds to
for 10 seconds to force an
to view your meter's current
9.4
.
2-8