Larson Davis SoundAdvisor 831C Reference Manual page 57

Module 6 Creating a Measurement Setup
L , L , L corresponding to values you select for
eq max min
frequency weighting and detector
1/1 and/or 1/3 octave real-time spectra (when optional
OBA firmware is installed)
Count of the number of times the levels (SPL and
Peak) exceed the Trigger Levels you set
In this module:
6.1 831C Setup Manager Overview ...........................................................................................6-1
6.2 Creating a Custom Setup File On the Meter ....................................................................... 6-2
6.2.1 Creating a New Setup File On the Meter ..............................................................6-2
6.2.2 Customizing Setup Values On the Setup Manager Tabs .....................................6-2
6.2.3 Saving the Setup File ............................................................................................ 6-7
6.2.4 Choosing a Run Mode ...........................................................................................6-7
6.3 Troubleshooting a Measurement Setup File ....................................................................6-11
6.1 831C Setup Manager Overview
FIGURE 6-1
Setup Manager File List on 831C
3.
4.
SoundAdvisor Model 831C
T
he 831C makes measurements based on the values you save in the setup
file (Setup). Setups are created, edited, and deleted using the Setup Manager.
This module describes using the Setup Manager on the 831C, and guides you
through the process of saving a Setup, to receive the following values and
sound metrics for your measurement:
L
peak
for frequency weighting
Six values of L
percentage parameter n
Sound exposure and sound exposure level data
1.
ager. To edit a Setup, highlight it, then press
1.
Settings: line displays the name of the Setup you are
currently editing.
2.
//*
(
3.
next measurement uses the Active Setup. Any Setup in
2.
the list can be set as the Active setup.
4.
Setup tabs to factory default values. The Default Setup
is a read-only file that can't be edited or deleted.
831C Setup Manager Overview
and L corresponding to the value you set
peak(max)
based on 6 user-selected values of the
n
The Setup File List is the first page of the Setup Man-
To navigate to other pages, press the right arrow
*//
) or left arrow (
The Active setup displays at the top of the list. The
The Default setup, when set to Active, restores all
5
. The
) softkeys.
6-1