Setting File Storage Preferences; Selecting A File Storage Location - Larson Davis SoundAdvisor 831C Reference Manual

3.2.3 Operating the 831C from a Web Browser

3.3 Setting File Storage Preferences

3.3.1 Selecting a File Storage Location

SoundAdvisor Model 831C
We recommend using G4 LD Utility or LD Atlas, but if needed you can operate
your meter remotely by using a web browser.
Step 1
Establish a network connection from the 831C to the Internet. For more
information, see Module 13 831C Network and Connections.
Step 2
You may want to consider activating the 831C network and meter security
features described in Module 11 Managing 831C Security.
Step 3
Open a web browser on a mobile device or PC. We recommend using Google
Chrome.
Step 4
In the address field, type the IP address of your 831C Sound Advisor.
Ex: 192.168.103.25/SoundAdvisor
To find your meter's IP address when using WiFi, go to Tools
TRY THIS
"My IP" appears at the top of the screen. To find your meter's IP address when
using Ethernet, go to Tools
Step 5
For step by step instructions to create a measurement, follow the process
outlined in 3.1 "Operating the 831C Using the Meter Display" on page 3-1.
Before you begin making a measurement, use the meter preferences to
indicate where your future data files will be stored.
In this section:
• 3.3.1 Selecting a File Storage Location
• 3.3.2 Using the 831C File Storage Calculator
In this section, choose how and where files are saved when a measurement
stops.
Step 1
On your 831C, go to Tools
Step 2
From the Auto-Store drop-down menu, choose one of the following values:
• None
After a measurement, the system properties do not save or prompt you to
save the measurement data. Choose this setting if you plan to use an auto
store option in the setup file or the Scheduling firmware option (831C-SCH).
• Prompt
Setting File Storage Preferences
3

Communication.
3

System Properties
3
Setup WiFi.

Preferences.
3-3