Larson Davis SoundAdvisor 831C Reference Manual page 61

FIGURE 6-7 Setup Manager: Control Tab
FIGURE 6-8 Setup Manager: Exceedance Triggers Tab
SoundAdvisor Model 831C
1.
//*
Step 7
Use the right (
6-7.
1.
Step 8
If enabled on your meter, use the right (
History tab. For information on choosing these settings, see Module 16 Using
Time History.
Step 9
Use the right (
shown in Figure 6-8.
Creating a Custom Setup File On the Meter
1.
Enter any value from 00.01 to 99.99%. For more
information, see "Ln Value" in the
on page C-1.
2.
Additionally, you can edit the Ln values and view
the calculated value with a measurement in progress.
) softkey to navigate to the Control tab as shown in Figure
1.
The Sound Advisor 831C has 6 Run Modes to control
the meter during a measurement. For more information
on each run mode, see
//*
) softkey to navigate to the Exceedance Triggers tab as
Appendix C Glossary
6.2.4 Choosing a Run Mode
//*
) softkey to navigate to the Time
.
6-5