Enabling Or Disabling Cloud Storage - Larson Davis SoundAdvisor 831C Reference Manual

9.10.1 Enabling Alert Notifications

9.11 Enabling or Disabling Cloud Storage

SoundAdvisor Model 831C
/*/
Step 6
Click Close (
In 831C firmware version 4.5+, this workflow is only available by using G4 LD
Utility software. Email and text alert notifications are now configured as part
of the user account in G4.
Additionally, with the optional Scheduling firmware (831C-SCH), users can
schedule periods when they want to receive alert notifications.
For details on this process, in G4, go to Help
LEARN MORE
Module 2 Getting Started in G4.
When a measurement data file is automatically or manually saved, you can
save it on the meter, to a USB drive, or upload directly to a remote storage
service such as Dropbox
notification via email or text when a file is saved to Cloud storage.
When cloud storage is enabled, data files continue to be stored using this
method until you disable it as shown in this section.
Before you begin:
• The initial cloud storage setup for your meter must be completed by
using the Setup Manager in G4.
LEARN MORE

Started in G4.
Step 1
To enable or disable cloud storage, press Tools
press the top-right softkey (
Step 2
Select the checkbox in-line with Auto Push to Cloud as shown in Figure 9-9, then
/*/
press Close (
1. Dropbox is a registered trademark of Dropbox, Inc. in the US and other
countries.
Enabling or Disabling Cloud Storage
) to save your settings and exit the menu.
1
or an SFTP account. You can also receive an alert
To complete this process, in G4 go to Help

Manuals G4 LD Utility Manual and open Module 2 Getting
//*
) until the Cloud Storage page displays.
) to save your changes.
 
Manuals G4 LD Utility,
3

System Properties, then
9-12