Larson Davis SoundAdvisor 831C Reference Manual page 31

Module 3 Getting Started
In this module:
3.1 Operating the 831C Using the Meter Display .....................................................................3-1
3.2 Operating the 831C Remotely .............................................................................................3-1
3.2.1 Operating the 831C from G4 LD Utility Software ................................................. 3-2
3.2.2 Operating the 831C from the LD Atlas App ..........................................................3-2
3.2.3 Operating the 831C from a Web Browser ............................................................ 3-3
3.3 Setting File Storage Preferences ........................................................................................3-3
3.3.1 Selecting a File Storage Location ......................................................................... 3-3
3.3.2 Using the 831C File Storage Calculator ................................................................3-4
3.1 Operating the 831C Using the Meter Display
3.2 Operating the 831C Remotely
SoundAdvisor Model 831C
Step 1
Prepare your data file storage preferences as shown in 8.1 "Setting Data File
Storage Preferences" on page 8-9.
Step 2
Create a measurement setup file as shown in Module 6 Creating a
Measurement Setup.
Depending on your measurement type and installed firmware options,
LEARN MORE
Modules 15-18 may be helpful while creating the measurement setup file.
Step 3
Calibrate your 831C as shown in Module 5 Calibrating Your SoundAdvisor
831C.
Step 4
Make a measurement as shown in Module 7 Making a Measurement.
Depending on your measurement type,
LEARN MORE
Study Example in the G4 LD Utility Manual
Step 5
Use the 831C File Manager to view and work with data files on the meter. For
more information, see the following sections:
• 8.2 "Using the Data File Manager" on page 8-10
• 8.3 "Saving, Moving, or Copying Data Files" on page 8-13
Step 6
For more information about modeling your measurement data files in G4, see
the G4 LD Utility manual, Module 7 Working With Data Files in G4.
In this section:
• 3.2.1 Operating the 831C from G4 LD Utility Software
• 3.2.2 Operating the 831C from the LD Atlas App
Operating the 831C Using the Meter Display
Module 4 Environmental Noise
may also be helpful.
3-1