Larson Davis SoundAdvisor 831C Reference Manual page 68

Module 7 Making a Measurement
In this module:
In this module:
In this module:
In this module:
In this module:
In this module:
In this module:
7.1 Before You Start ...................................................................................................................7-1
7.1.1 Position the 831C .................................................................................................. 7-2
7.1.2 Performing an Area Sound Field Check ............................................................... 7-3
7.2 Performing the Measurement .............................................................................................7-4
7.2.1 Pausing the Measurement .................................................................................... 7-5
7.2.2 Resetting a Measurement .....................................................................................7-7
7.2.3 Stopping the Measurement .................................................................................. 7-8
7.3 Storing the Measurement ...................................................................................................7-8
7.1 Before You Start
SoundAdvisor Model 831C
M
aking a measurement on the 831C can be as simple as viewing a
live reading of the area using the Big Digit display, or as sophisticated
as setting it up with environmental accessories, deploying it in the
field, and logging measurements when the sound level is above 80 dB
over the course of many months in all weather conditions. For both
tasks, understanding the basics of measurement making is essential.
Quick Measurement Steps:
Step 1
Step 2
Step 3
Step 4
Step 5
Before performing a measurement, follow these steps to ensure the
measurement is performed properly:
Each step has a link to the first 6 Modules in the manual, and if read
LEARN MORE
through, will lead to optimal performance of the 831C.
Before You Start
Power On the 831C.
Navigate to Overall display.
Press Run 9.
When finished, press Stop 7.
Press Store 7 and save your data file.
7-1