Larson Davis SoundAdvisor 831C Reference Manual page 64

When combined with the
Measurement History feature,
these 3 modes can be used to
create multiple measurement
intervals stored in a data file,
with new data files created at
regular time intervals. For
more information, see
Setting Up a Measurement With
.
Measurement History
SoundAdvisor Model 831C
On the Control tab, there are 6 Run Modes available. Your choice determines
which other settings and features are available. Click on a link below to learn
about a run mode.
In this section:
Using Manual Run/Stop Mode
•
Using Timed Stop Mode
•
Using Stop When Stable Mode
•
{
Using Continuous Mode
•
Using Single Block Timer Mode
•
15.1
Using Daily Timer Mode
•
Using Manual Run/Stop Mode
Recommended for:
Strength:
Using this mode, you plan to start and stop the measurement manually. In
this mode, the 831C meter preference for Auto-Store determines what
happens when you stop the measurement.
Step 1
Select Manual Run/Stop from the Run Mode drop-down menu.
Step 2
If desired, enable any additional settings on the Control tab, and return to Step 8
on page 6-5.
Using Timed Stop Mode
Recommended for:
Strength:
The measurement is initiated manually, and stops automatically after the
period you indicate.
Step 1
Select Timed Stop from the Run Mode drop-down menu.
a. Enter the measurement length in the Time (hh:mm:ss) field.
Step 2
If desired, enable any additional settings on the Control tab, and return to Step 8
on page 6-5.
Creating a Custom Setup File On the Meter
When you want to manually control when the
meter runs and stops.
Custom, live measurement
Site surveys
All measurements have the same duration.
6-8