Larson Davis SoundAdvisor 831C Reference Manual page 66

SoundAdvisor Model 831C
Using Single Block Timer Mode
Recommended for:
Strength:
Step 1
Select Single Block Timer from the Run Mode drop-down menu.
a. Enter a Start (y-m-d) date and Time, and an End (y-m-d) date
and Time, where Time is the time of day.
Step 2
If desired, enable any additional settings on the Control tab, and move to Step 8
on page 6-5.
If you're planning to use meter security (meter lock) during this
LEARN MORE
measurement, refer to
work together.
Using Daily Timer Mode
Recommended for:
Strength:
Use Daily Timer mode to schedule one or more measurements, which start
and stop according to the time you set, every day until the End date.
Step 1
Select Daily Timer Mode from the Run Mode drop-down menu.
a. Enter a Start (y-m-d) date and Time, and an End (y-m-d) date
and Time, where Time is the time of day.
b. If desired, select the checkbox in-line with 2, and 3 to enter
additional measurement periods.
Step 2
If desired, enable any additional settings on the Control tab, and return to Step 8
on page 6-5.
If you're planning to use meter security (meter lock) during this
LEARN MORE
measurement, refer to
work together.
Creating a Custom Setup File On the Meter
unmonitored measurements
One measurement automatically starts and
stops at the date and time you set.
Table 11.1 on page 11-2
Work area surveys which follow a worker's daily
schedule and account for breaks.
Totally autonomous, daily intermittent
measurement for long or short number of days.
Table 11.1 on page 11-2
to learn how these features
to learn how these features
6-10