Using Load Settings; Using Create Average - Larson Davis SoundAdvisor 831C Reference Manual

8.2.2 Using Load Settings

8.2.3 Using Create Average

SoundAdvisor Model 831C
data file icon
seeing a data file and not live data.
From a data file, you can load the measurement Setup properties used to
create the data file into the Active setup.
Before you begin:
• Save your current Active settings to a new Setup file, if needed.
Settings in the Active setup will be lost.
• Stop any measurement currently running or paused.
Step 1
On the 831C, go to Tools
Step 2
Highlight the desired data file, press Menu (
from the pop-up menu. (No confirmation appears.)
/*/
Step 3
Close (
Active from the file list. Press the right or left softkeys (
Setup properties.
Create Average takes a saved data file and adds its average as an instance to
the unsaved Overall measurement.
•
CAUTION
average instance.
• You can add multiple files to the average. Each appears as a new
instance in the Overall measurement pages. However, each file can
only be added once.
• A measurement can run after the averages are loaded. But this isn't
recommended for averaging purposes.
• After data files are averaged, you can save the new data as a single
file.
Follow these steps to create an average of your data file(s):
Step 1
Navigate to Tools
Using the Data File Manager
displays in-line with the file name to indicate that you are
3
 Data File Manager.
) the Data Manager, go to Tools
: Any unsaved measurement is overwritten with the new
3
 Data File Manager.
//*
), and select Load Settings

Setup Manager, and select
*/*
) to examine the
8-12