Power Key Functions; Powering On The 824; Battery Life - Larson Davis System 824 Training Manual
Sound level meter
Hide thumbs
Also See for System 824:
- Training manual (143 pages) ,
- Technical reference manual (673 pages) ,
- Reference manual (536 pages)
Table of Contents
Advertisement
Power
Key Functions
Powering on the 824
Battery Life
1-2
Turn the 824 on by pressing the On/Off
The instrument will go through a brief start up cycle, where
it flashes the 824 ID screen.
It will then switch to the display that was established before
it was powered off in its previous session. The On/Off
key can also be used to check the battery power, as well as
verify the on/off status of the display's backlight. Press the
On/Off
key again to view the PWR screen:
Battery life is expressed in a percentage (100% being fully
charged). If you are powering the 824 with an external
source (such as the AC/DC adaptor), the voltage level will
be shown.
824Training Manual
key .
4/19/01
Advertisement
Table of Contents
Need help?
Do you have a question about the System 824 and is the answer not in the manual?