Table of Contents
Advertisement
diagnostic show boot_parameter
To display a specific boot-time parameter (if one exists) that a
technical support representative might need, use the diagnostic
show boot_paramter command.
Caution:
!
technical support.
Syntax
diagnostic show boot_parameter
Parameters
{string}
Specifies the boot-time parameter character string whose
associated value you want to display. If you need to use this
command, a technical support representative will tell you the
name of the boot-time parameter to use.
Related Commands
diagnostic commands:
I
diagnostic clear boot_parameters
I
diagnostic set boot_parameter
Use this command only under the direction of
diagnostic Commands
(page
6-2)
(page
6-11)
6-12
Advertisement
Table of Contents
