Table of Contents
Advertisement
container extend volume
To extend a volume set by adding freespace to it, use the
container extend volume command. The file system on the
volume set remains intact and can be extended to include the
added space.
Command and Switch Availability
This command is supported on Windows.
Syntax
container extend volume
[{free_space}] [{free_space}...]
Parameters
{container}
Specifies the ID number (0 to 63) of the array (volume set) to
extend.
{free_space}
Specifies the SCSI device and its associated freespace used to
extend the specified array (volume set).
For further details, see
{free_space}...
Specifies a SCSI device or devices and associated freespace or
freespaces used to extend the specified array (volume set).
You can specify a maximum of 16 freespace elements. If you
exceed 16 freespace elements, the command displays an
appropriate error message.
Examples
Before extending a volume set, use the container list
command to obtain information about any existing arrays. As the
following example shows, there is an array (volume set) 1 on this
controller:
AAC0>container list
Executing: container list
Num
Dr Label Type
-- ----- ------ ------ --- ------ ------- ------ -------------
E: 1
Volume 100MB
free_space on page
Total
Oth Stripe
Size
Ctr Size
{container}
1-11.
Scsi
Usage
C:ID:L Offset:Size
NTFS
2:02:0 200MB: 100MB
container Commands
Partition
3-47
Advertisement
Table of Contents
