Table of Contents
Advertisement
The Rev Column
The Rev column displays the revision number of the SCSI device.
The Block Column
The Block column displays the number of blocks available on the
SCSI device.
The Bytes/Block Column
The Bytes/Block column displays the number of bytes for each
block on the SCSI device.
The Usage Column
The Usage column displays the usage of the SCSI device. The disk
list command can display one of the values listed in
Table 5-2 SCSI Disk Device Usage Values
Value
Detached
DOS
Initialized
Not Initialized
Offline
Unowned
The Shared Column
The Shared column displays the value YES if the device resides on
a shared channel and the value NO if the device does not reside on
a shared channel. In the example, the devices do not reside on a
shared channel.
Meaning
The system detected that the diskset in the detached
state. When a diskset is detached, it is not available
for use.
The SCSI device was prepared for use (initialized)
with MS-DOS partitions.
The SCSI device was prepared for use (initialized)
with arrays.
The SCSI device was not prepared for use
(initialized) with arrays.
The SCSI device was present at boot time.
However, the device is either removed from the
controller or it failed.
The controller does not own the SCSI device.
disk Commands
Table
5-2.
5-8
Advertisement
Table of Contents
