Adaptec AAR-21610SA Reference Manual page 50

Use the container list command after using the container
create mvolume command to display information about the
multilevel array of volume sets after you create it, as in the
following example:
AAC0>container list
Executing: container list
Num
Dr Label Type
-- ----- ------ ------ --- ------ ------- ------ -------------
0 Volume 60.0MB
63 Stripe 45MB
62 Stripe 15MB
The following list describes the columns that contain information
as a result of creating a multilevel volume set with the container
create mvolume command:
I The Num Label column displays the ID number (in the
example, 0) of the newly created multilevel volume set and
(indented to the right) the ID numbers of the arrays that make
up the multilevel volume set. In the example, arrays 63 and 62
are the stripe sets that make up the multilevel volume set.
If you specify a label when creating the multilevel volume set,
it appears in this column. Because no label was specified
when the multilevel volume set was created, no label appears
in the column.
On UNIX systems, the root special file associated with the
multilevel volume set also appears in this column.
I The Type column displays the type name Volume for the newly
created multilevel volume set. The Type column also displays
the array type for the underlying arrays. In the example, Stripe
appears in the Type column to indicate that the arrays that
make up the multilevel volume set are stripe sets.
I
The Total Size column displays the total size for the
multilevel volume set. This size is the total of all the
underlying arrays. In the example, the total size for array 0
(the multilevel volume set) is the sum of the two underlying
arrays (60 MB).
The Total Size column also displays the sizes of all the
underlying arrays. In the example, the size of array 63 (45 MB)
and array 62 (15 MB) were specified when the stripe sets were
created with the container create stripe command.
Total Oth Stripe
Size Ctr Size
64KB
64KB
Scsi
Usage C:ID:L Offset:Size
None
0:02:0 64.0KB:
0:03:0 64.0KB:
0:04:0 64.0KB:
0:05:0 64.0KB:
container Commands
Partition
15.0MB
15.0MB
15.0MB
15.0MB
3-19