Adaptec AAR-21610SA Reference Manual page 275

As the example shows, the temperature sensor status display
contains the following columns:
I
Enclosure
I
Sensor
I
Temperature
I Threshold
I
Status
The following sections describe the information that the
enclosure show temperature command can display in these
columns.
The Enclosure Column
The Enclosure column displays the ID associated with the
enclosure management device that you specified on the command
line. If you did not specify an ID, the enclosure show
temperature command displays the IDs for all enclosure
management devices connected to the controller. In the example, 0
is specified.
The Sensor Column
The Sensor column displays the unit number associated with the
temperature sensor that you specified on the command line. If you
did not specify a unit number, the enclosure show
temperature command displays the unit numbers for all
temperature sensors on the enclosure management device or
devices.
The Temperature Column
The Temperature column displays the internal enclosure
temperature for this temperature sensor, in degrees Fahrenheit. The
temperature can range from -10 degrees to 245 degrees Fahrenheit.
In the example, the temperature is 70 degrees Fahrenheit.
enclosure Commands
9-42