Disk List - Adaptec AAR-21610SA Reference Manual

disk list

To display a list of the disks available on the currently opened
controller, use the disk list command.
Syntax
disk list [/all{=boolean}] [/full{=boolean)]
[{scsi_device}]
Parameters
{scsi_device}
Specifies the ID for a specific SCSI device for which you want
to display information. A SCSI device consists of a SCSI
channel number (for example, 0, 1, 2, 3, etc.), SCSI device ID
(0 through 15 inclusive), and SCSI device logical unit number
(0 through 7 inclusive).
For further details, see
Switches
/all{=boolean}
Specifies whether to display a list of all SCSI devices. If you
set this switch to TRUE, the command displays a list of all
SCSI devices on the controller.
This switch defaults to FALSE if you specify scsi_device.
Otherwise, the switch defaults to TRUE.
/full{=boolean}
Specifies whether to display detailed information. If you
specify TRUE, the command displays detailed information. If
you specify FALSE, the command does not display detailed
information.
This switch defaults to FALSE.
scsi_device on page
disk Commands
1-10.
5-5