Controller Set Array_Verify - Adaptec AAR-21610SA Reference Manual

controller set array_verify

To enable or disable the array verify operation, use the
controller set verify command. This command allows you
to enable or disable the array verify operation for all arrays
controlled by the specified controller.
Syntax
controller set array_verify
[/verify_enabled{=boolean}]
/verify_enabled{=boolean}
Specifies whether to turn on or off the array verify feature on
the specified controller. You must set this switch to TRUE if
you want to turn on array verify for all arrays associated with
the specified controller.
To turn off the array verify feature on the specified controller,
set this switch to FALSE. The command defaults to TRUE,
which means the command turns on the array verify feature
on the specified controller.
Examples
Before turning the array verify feature on or off, check its status by
using the controller show array_verify command. The
following example shows that the controller's array verify feature
is currently disabled:
AAC0> controller show array_verify
Executing: controller show array_verify
Array verify DISABLED
The following example turns on (enables) the array verify feature
for the currently opened controller:
AAC0> controller set array_verify /verify_enabled
Executing: controller set array_verify /verify_enabled=TRUE
The controller show array_verify command indicates that
the controller's array verify feature is currently enabled. The
command also displays the number of errors (if any) found as a
result of the array verify operation.
AAC0> controller show array_verify
Executing: controller show array_verify
Array verify ENABLED
Errors found 0
controller Commands
4-19