Adaptec AAR-21610SA Reference Manual page 103

{scsi_device}...
Specifies one or more SCSI devices. Typically, you specify one
or more SCSI devices when adding more drives to an array or
moving an array's partitions. A SCSI ID consists of a SCSI
channel number (for example, 0, 1, 2, 3, etc.), a SCSI device ID
(0 through 15 inclusive), and a SCSI device logical unit
number (0 through 7 inclusive).
For further details, see
The command uses the freespace(s) from the SCSI device(s)
you specify to reconfigure the array.
Switches
/stripe_size{=integer}
Specifies the changed stripe size for the array. You can specify
stripe sizes for the following types of arrays:
I
RAID 5 array
I
Multilevel stripe set:
– Stripe set of mirror sets
– Stripe set of volume sets
– Stripe set of stripe sets
scsi_device on page
container Commands
1-10.
3-72