Table of Contents
Advertisement
/unconditional{=boolean}
Specifies whether to initialize the disk even if arrays on the
disk have open files. If you specify TRUE for this switch, the
command initializes the disk even if the disk has open files.
The default is FALSE; that is, the disk initialize
command does not initialize a disk that has open files on it.
WARNING:
can cause a system crash under some circumstances.
Examples
The following example initializes a SCSI disk device (SCSI channel
number 0, SCSI device ID 2, and SCSI device logical unit number 0)
that has data on it:
AAC0>disk initialize /always (0,2,0)
Executing: disk initialize /always=TRUE (CHANNEL=0,ID=2,LUN=0)
Unconditionally deleting an array that is in use
disk Commands
5-4
Advertisement
Table of Contents
