Table of Contents
Advertisement
The RO Column
This column displays the letters RO if the array is read-only.
Otherwise, if the array is read-write the column displays a blank
space. You can explicitly make an array read-only and read-write
with the container readonly and container readwrite
commands.
Some CLI commands cause an array to temporarily become read-
only without the use of the container readonly command.
The Lk Column
This column displays the letter L if the array is locked. Otherwise,
if the array is not locked, the column displays a blank space. You
can explicitly lock and unlock an array with the container lock
and container unlock commands.
Some CLI commands (during their execution) cause the array to
become locked. Typically these commands unlock the array upon
completing execution.
The Task Column
This column displays the task or tasks running on a specified array
or SCSI disk. Specifically, the column can display the items listed in
Table
3-4.
Task
Meaning
A create mirror set or create multilevel mirror set task is
Create
running on the specified array. When the create mirror set or
create multilevel mirror set task completes, the specified
array is a mirror set or a multilevel array of mirror sets. The
create a mirror set or create a multilevel mirror set task runs
as a result of using the
or
An array format FAT file system task is running on the
FmtFAT
specified array. The format FAT file system task runs as a
result of using the container format command with the
/file_system
An array format NTFS file system task is running on the
FmtNTFS
specified array. The format NTFS file system task runs as a
result of using the container format command with the
/file_system
Table 3-4 Task Types
container create mmirror
switch set to
switch set to
container create mirror
FAT
.
NTFS
.
container Commands
command.
3-55
Advertisement
Table of Contents
