Adaptec AAR-21610SA Reference Manual page 85

The Scsi :ID:L Column
C
This column displays the SCSI channel number, the SCSI ID, and
the SCSI logical unit number for the SCSI disk or disks on which
the array was created.
The Partition Offset:Size Column
This column displays the offset and size for the underlying
partitions.
If a partition is dead, the ":" (colon) in the Partition Offset:Size
column changes to a "!" (exclamation point). See the disk
remove dead_partitions
information on dead partitions.
The State Column
This column displays information about the state of the array.
Specifically, the column can display the items listed in
Container State
Copy
Create
Dest
Normal
Raid5
Source
Temp
Unprot
(page
Table 3-3 Container State Items
Meaning
Indicates that the array is the copy array in an array
reconfiguration operation.
Indicates the creation of a mirror set.
Indicates that the array is the destination array in an
array reconfiguration operation.
Indicates that the mirror set is in the normal state.
Indicates that the array is a RAID 5 array in an array
reconfiguration operation.
Indicates that the array is the source array in an array
reconfiguration operation.
Indicates that the array is a temporary array in an array
reconfiguration operation.
The RAID 5 array is not redundant. The Unprot array
state typically displays during the creation of the
RAID 5 array. Upon completion of RAID 5 array
creation, the CLI replaces the Unprot state with the
Normal state.
container Commands
5-10) command for more
Table 3-3.
3-54