Advanced Settings - Stratasys J4100 User Manual

Stratasys J4100 User Guide

Advanced Settings

The Advanced Settings dialog box enables you to configure the Material
Replacement wizard for special purposes. If necessary, click Advanced
Settings in the Material Replacement Options screen before clicking Next.
By default, Automatic slot selection determines the best positioning for the
material containers, based on materials currently in the system. This ensures
minimum flushing of materials currently loaded.
Select Manual slot selection—
• if there is a special need to load material containers in certain slot locations.
• if you only want to change one of the material containers for a given material
Some materials cannot replace certain other materials. If you attempt to do
so, the wizard notifies you.
To select the container positions manually:
1. In the Material Replacement Options screen, click Advanced Settings.
2. In the Advanced Settings screen, select Manual slot selection, and click
3. In the Material Replacement Options screen, Both cartridges is selected for
DOC-26000 Rev. C
channel.
Apply.
Figure 4-22 Manual slot selection
each position. To print with only one of the cartridges, clear the check box and
then select either the left (L) or the right (R) cartridge.
Figure 4-23 Manual material replacement
4 Operating and Maintaining the Printer
4-23