Table of Contents
Advertisement
Stratasys J4100 User Guide
6. Separate the tube holder from the pump assembly.
7. Remove the tube from the tube holder and save the two parts of the clamp for
8. Carefully detach the tube at both ends. Use the cleaning cloths to prevent
9. Discard the old tube and the cleaning cloths.
These items contain uncured printing material. Dispose of them in
accordance with environmental and safety requirements.
10. Attach the ends of the new tube.
11. Place the tube clamp onto the tube as before, and insert the tube into the tube
DOC-26000 Rev. C
Figure 4-119 Tube holder removed from pump assembly
re-assembly.
material leaking from the tubes.
holder, making sure that the flat surface of the clamp faces outward.
Figure 4-120 Left: Tube clamps; Right: Tube inserted into tube holders
4 Operating and Maintaining the Printer
4-84
Advertisement
Table of Contents
